peaking factor meaning in Chinese
高峰系数
Examples
- Design pumping capacity and the assumed peak factor for the sps
晏架街污水泵房的设计泵水量和假设的峰值因数; - The value of the peak factor was discussed with the crossing theory and reliability theory
摘要从随机极值理论和工程实际应用2个方面入手,对峰值因子的取值问题进行探讨。 - The design flow capacity of the anchor street sewage pumping station is 3138 litres per second and the assumed peaking factor would be 3
晏架街污水泵房的设计泵水量是每秒3138公升,而假设的峰值因数是3 ; - Moreover , utilizing the theory mentioned above , the value of the peak factor about the wind - induced vibration of roof structure was obtained , the results show that the prescript of peak factor in chinese code is probably unsafe for the wind - resistant design
该算例的分析结果表明:当采用我国荷载规范规定的峰值因子取值来计算屋盖结构的风振响应时,其结果可能是偏于不安全的。 - The equation among peak factor , quality factor , switch initial angel is concluded . on the basis of the equation , peak factor curve has been programmed . the rms value , peak value and switch initial angel can be shown in the screen of computer
本文推导峰值系数与品质因数和合闸初相角的函数关系式,依此编制峰值系数曲线程序,利用对品质因数和合闸初相角的控制可使每个绕组都受到规定峰值的作用。